The length of life of DC cooling fans is not only reflected in the performance. It can make the cooling fans use better. It can protect the cooling fan and prolong its service life. It is necessary to apply some correct methods to store and maintain the cooling fan. . The following is introduced by the Shenzhen Fengwang Electronic Technician. The storage and maintenance methods of the cooling fan are as follows:

1. When the DC cooling fan is found to have abnormal sound, serious heat of the motor, energized shell, tripping of the switch, inability to start, etc. during operation, it should be stopped immediately. In order to ensure safety, it is not allowed to perform maintenance during the operation of the fan. After the maintenance, it should be tested for about 5 to 10 minutes to confirm that there is no abnormal phenomenon and then start the operation.

2. It can only be operated under the condition that the fan is completely normal. At the same time, it is necessary to ensure that the capacity of the power supply facilities is sufficient and the voltage is stable. It is forbidden to exceed or fall below the product voltage use range, or the phase-to-phase operation is not allowed. The power supply line must be a dedicated line. Long-term use of temporary lines.
The
3, the use of DC cooling fan environment should always keep the air smooth, dry, clean. The surface of the fan should be kept clean. There should be no debris in the inlet and outlet, and dust and other debris in the fans and pipes should be regularly removed.

4, according to the use of environmental conditions from time to time to supplement or replace the bearing grease (closed bearings in the service life of the motor does not have to replace the grease), in order to ensure the DC cooling fan in the process of good lubrication, refueling frequency of not less than 1000 Hours/times Closed bearings and motor bearings, refueling Fill 1/3 of the inner and outer rings of the bearing with zl-3 lithium-based lubricating grease, no oil running is strictly prohibited

5, DC cooling fan should be stored in a dry environment to avoid motor or motor damp. DC cooling fans should have defensive measures when stored in the open air. In the process of storage and handling, it is necessary to prevent bumping or strong impact from external force so as not to damage the blower.